Failure Causes and Risk Analysis of Syringe Pumps (Infusion Pumps) Based on Real-World Data

Failure Causes and Risk Analysis of Syringe Pumps (Infusion Pumps) Based on Real-World Data

Authors

  • Ruixia Wu The Second Affiliated Hospital of Wenzhou Medical University, Wenzhou, Zhejiang, China

DOI:

https://doi.org/10.53469/wjimt.2025.08(05).22

Keywords:

Syringe Pumps, Infusion pumps, Failure Causes, Risk Analysis

Abstract

This paper introduces the operating principles and structures of syringe pumps and infusion pumps. It analyzes 340 repair records of syringe pumps (infusion pumps) used in the emergency and ICU departments of Longwan Campus of the Second Affiliated Hospital of Wenzhou Medical University from January 1, 2021 to July 1, 2024, to find out the causes of failures and conduct a brief risk analysis of the failures. It is hoped that these risks can be avoided in future clinical use to ensure the safety and effectiveness of the machine.

References

Mandel J E. Understanding infusion pumps [J]. Anesthesia & Analgesia, 2018, 126 (4): 1186-1189.

Zhang Jianshuang. Design and implementation of an infusion pump/syringe pump detection system [D]. Chengdu: University of Electronic Science and Technology of China, 2014.

Jafarzadeh M, Farokhi F. Design and construction of an automatic syringe injection pump [J]. Pacific Science Review A: Natural Science and Engineering, 2016, 18 (2): 132-137.

Mukoreka J, Sisay I. Safe practice in syringe pump management [J]. Nursing Times, 2015, 111 (14): 19-21.

Instruction Manual for SN-A Series Micro-injection Pumps.

Instruction Manual for SN-S Series Micro-injection Pumps.

Instruction Manual for GRASEBY C9 Micro-injection Pumps

Instruction Manual for GRASEBY 1200 Micro-injection Pumps

Liu Jinchu, Guan Qinghua, Liu Lin. Discussion on the Specification of Quality Control Inspection and Preventive Maintenance for Medical Equipment [J]. Chinese Journal of Medical Equipment, 2019, 34 (12): 114-117.

Xie Feng, Zhuang Jingwen, Wu Ping, et al. A Preliminary Exploration of the Quality Control System for Infusion Pumps and Syringe Pumps [J]. Chinese Journal of Medical Equipment, 2017, 14 (8): 36-38.

Zhou Quanzhi, Zou Qinghui, Lu Jianxiong, et al. An Exploration of the Quality Control Management Plan for Infusion Pumps and Syringe Pumps [J]. Chinese Journal of Medical Equipment, 2015, 30 (10): 140-142.

Zhang Jucheng, Luo Cheng, Huang Tianhai, et al. Statistical Analysis on the Implementation and Quality Inspection of PM (Preventive Maintenance) for Micro-injection Pumps [J]. Medical Equipment, 2014, 27 (12): 64-66.

Chen Dandan, Peng Yang. A Discussion on Planned Maintenance Methods for Intravenous Micro-injection Pumps [J]. Chinese Journal of Medical Equipment, 2018, 33 (2): 171-173.

Chen Shangwen. A Preliminary Exploration of Calibration Methods for Syringe Pumps and Infusion Pumps [J]. Metrology and Testing Technology, 2010 (4): 40-41.

Li Wenli, Liu Yan, Wen Ying. A Discussion on Flow Rate Measurement Parameters Based on the Calibration Standards for Medical Syringe Pumps and Infusion Pumps [J]. Metrology and Testing Technology, 2014, 41 (11): 23-24.

Lin Zhikun, Huang Yan, Xia Yujia, et al. Precautions for Calibration of Medical Syringe Pumps and Infusion Pumps [J]. Metrology and Testing Technology, 2018, 45 (3): 42-43.

Liu XX, Li YH, Wang F, et al. A Retrospective Analysis of 674 Adverse Events Related to Infusion Pumps [J]. Chinese Journal of Medical Equipment, 2020, 35 (3): 145-148.

Jiang Mingyin, Wang Daoxiong, Han Baojiang, et al. Risk Analysis of Adverse Events in Clinical Use of Infusion Pumps Based on Real-world Data [J]. Chinese Medical Equipment Journal, 2022, 43 (10).

Yang Ming, Yao Hongsheng, Cheng Shidong, et al. A Study on the Effect of Improving the Clinical Use Reliability of Micro-injection Pumps through the PDCA Method [J]. Chinese Journal of Medical Equipment, 2022, 37 (9): 138-141.

Downloads

Published

2025-05-30

Issue

Section

Articles
Loading...